|
|
Water
Softeners & Salts
. |
|
A Water
Softener is for the treatment of hard water.
It utilizes a high capacity resin for softening and is
capable of very high flow rates with very little pressure
drops through the system.
- Safe,
low-voltage operation
- Full
1" porting throughout the system — means the
highest service flows with the least pressure drops
- Non-corrosive
valve made of high-tech, durable Noryl™ plastic
Three models to choose from: standard time clock, metered consumption,
* electronic metering with "system day
over-ride"
- All
regeneration cycles are custom programmed for your
specific water problems
See below for models we
offer ...
|
 |
WaterRight®
Systems
ASC1
Sanitizer 1054ME
Iron,
manganese and hardness are removed from
household water, while the pH is increased |
Capacity
(Maximum): 22,600 @ 15.9 Grains per gallon
Efficiency @ lowest setting: 2,700
Maximum Water Hardness: 30
Maximum Iron: 10
Minimum pH Corrected to 7: 6
Total pH adjusted water at continuous flows:
252
Service Flow/GPM vs. Pressure Drop:
17 gpm/15 pi
Continuous Flow/GPM vs. Pressure Drop: 8
gpm/5 psi
Water Pressure Range: 25-100
Water Temperature: 33-100
Electrical Requirement (voltz-hertz):
110-50/60
Pipe Size: 1"
Tank Size - Media Tank: 10"(w) x
54"(h)
Tank Size - Brine Tank: 18"(w) x
33"(h) |
 |
 |
WaterRight®
Systems
ASC2
Sanitizer 1054ME
Iron,
manganese and hardness are among the key
substances removed from household water |
Capacity
(Maximum): 34,800 @ 15.9 Grains per gallon
Efficiency @ lowest setting: 3,800
Maximum Water Hardness: 60
Maximum Iron: 10
Service Flow/GPM vs. Pressure Drop:
17 gpm/15 pi
Continuous Flow/GPM vs. Pressure Drop: 8
gpm/5 psi
Water Pressure Range: 25-100
Water Temperature: 30-100
Electrical Requirement (voltz-hertz):
110-50/60
Pipe Size: 1"
Tank Size - Media Tank: 10"(w) x
54"(h)
Tank Size - Brine Tank: 18"(w) x
33"(h) |
|
| CSI
Water Treatment Systems
Water hardness is
actually dissolved by rock! Calcium and
Magnesium can cause scale build-up in pipes and
hot water tanks, and cause laundry to come out
stiff and gray. When iron is present, sinks,
fixtures and clothes can be stained or
ruined. It takes more energy and cost to
heat hard water, plus you can use twice the amount
of soaps, detergents, shampoos and related
products compared to soft water.
The CSI Models
TS 32-25T & MS32-25T can help soften your
water. "T" means Timed,
"M" means Metered. See specs
below: |
|
Grains
Capacity/Regeneration (Maximum): 30,700
Salt Used/Regeneration (Pounds)(Maximum):
15.0
Maximum Raw Water Hardness (Grains): 75
Maximum Clear Iron/Manganese (ppm): 5
Exchange Resin (cu. ft.): 1.0
Mineral Tank (polyglass): 9 x 48
Brine Tank (polyethylene with grid &
safety): 18 x 33
Service Flow Rate (gpm): 10.0
Backwash Flow Rate (gpm): 2.4
Gallons Used/Regeneration: 80
Space Required: 18 x 27 x 56
Approximate Shipping Weight (pounds):
100
|
|
|
Click
here for Salts ... Page 1 > Page
2
|
|
Back to Filtration
|
|
