About the Company
Well Drilling Services
Pump Services
Water
Filtration
Service
& Repairs
Planning to Construct a Well?
Water Testing
Well Construction Regulations
Frequently Asked Questions & Troubleshooting
Customer Education
Glossary of Well Terms
Photo Gallery
Contact Us
Form
Home

_____________________
2003 - 2005
All rights reserved.

Royall Pump
& Well Company
Robert W. Royall, Owner

2958 Anderson Highway
Powhatan, VA  23139

804.598.8147
phone
804.598.1291
fax

Click here to send email ...

What is a Jet Pump?

Jet Pumps are mounted above ground and lift the water out of the ground through a suction pipe.  Jets are popular in areas with hfigh water tables and warmer climates.  There are two categories of jet pumps and pump selection varied depending on water level.  Shallow well installations go down to a water depth of about 25 feet.  Deep wells are down 150 feet to water, where surface pumps are involved.

Pro Series, our most powerful jet pump is available in 1/2, 3/4, or 1 HP models. The Pro Series Jet is equipped with a forged bronze impeller, and delivers up to 23 gallons per minute from a shallow well and 20 gallons per minute from deep well installations.

Pro Series
RP2 Series
Heavy-duty cast iron case and bronze impeller ensure optimum durability. Heavy-duty cast iron construction for long life.
Thermoplastic diffuser is molded for efficiency and dependability. Thermoplastic impeller and diffuser for
increased efficiency and dependability.
Screw-in injector for easy conversion from shallow to deep well installation. Cast-iron case will handle booster pump applications up to 150 PSI.
Shaft coupling designed for easy removal of pump motor. Shaft coupling designed for easy removal of pump motor.
Mechanical shaft seal ensures leakproof fit and
continuous water lubrication
Mechanical shaft seal ensures leakproof fit and
continuous water lubrication
High service factor 56C-frame motors for maximum performance. High service factor 56C-frame motors for maximum performance.
Hardware kit allows for versatility of installation and includes pressure gauge, plugs, shallow well injector, and bypass plug. “Convertible” Hardware includes pressure gauge, plugs, by-pass plug, and shallow well injector (screw-in injector allows easy conversion from shallow to deep well installation.)
Adjustable pressure switch is factory-installed at
30/50 PSI.
Adjustable pressure switch is factory-installed at
20/40 PSI.
Connections:
1.25” FNPT Suction
1” FNPT Discharge
1” FNPT Drive Line
Connections
1.25” FNPT Suction
1” FNPT Discharge
1” FNPT Drive Line
Maximum temperature of 140°F. Maximum temperature of 140°F.
Download Performance Data
Download Product Overview
 
Download Performance Data
Download Product Overview