|
|
HP-Series
- The
high performance tanks for hydropneumatic applications
|
 |
The WellMate HP-Series is
the cost-effective solution for water treatment and
hydropneumatic applications. Ideal for aggressive water
conditions (including hypocloride environments). These
high performance tanks can be used as an open system to
release methane and other undesirable well gases. The
open system feature also makes WellMate HP tanks ideal
for water treatment applications where air is introduced
for the oxidation of iron and aeration of sulfur gases.
- Hydropneumatic
- Sulfur and iron water
treatment
- Release of methane and
other undesirable gases
|
|
| WellMate
Advantages |
| Corrosion-proof
composite construction From
the high density polyethylene inner liner to the
fiberglass-wound and epoxy resin-sealed outer
shell, Low-Profile tanks contain no steel. So
they can’t rust. |
Little
or no maintenance Because
they contain no steel, there is no paint to
scratch or touch up. |
Light
weight WellMate
tanks are quicker, easier and less costly to
install than steel tanks. |
Higher
performance The HP-Series tank design
provides 50% more drawdown than similar sized
conventional tanks. |
| NSF
and/or FDA listed material |
Factory-backed
warranty WellMate
backs its pressure tanks with a complete
warranty, giving your customers the confidence
and peace of mind that can turn them into
buyers. |
|
|
HP-Series
Performance Data
| Model
Number |
Capacity
gal/liter |
Max.
Operating Pressure
psi / kPA / Bar |
Drawdown
30/50 Setting**
gal/liter |
Diameter*
inch / cm |
Overall
Height*
inch / cm |
Height
inlet/outlet to floor
inch / cm |
System
Connection
Top
Bottom |
Assembly
Weight*
lb / kg |
| HP-7 |
30.0
/ 114 |
75
/ 500 / 5.0 |
6.6
/ 25.0 |
16
/ 41 |
43¾
/ 111 |
1½
/ 3.8 |
¼"
vent line
1¼" socket |
26
/ 11.8 |
| HP-9 |
40.0
/ 151 |
75
/ 500 / 5.0 |
9.0
/ 34.1 |
16
/ 41 |
56½
/ 144 |
1½
/ 3.8 |
¼"
vent line
1¼" socket |
29
/ 13.2 |
| HP-8SQ |
40.0
/ 151 |
75
/ 500 / 5.0 |
8.0
/ 30.3 |
21
/ 53 |
35¼
/ 90 |
2
/ 5.1 |
¼"
vent line
1¼" socket |
34
/ 15.4 |
| HP-18 |
80.0
/ 303 |
75
/ 500 / 5.0 |
17.8
/ 67.4 |
21
/ 53 |
62
/ 157 |
2
/ 5.1 |
¼"
vent line
1¼" socket |
44
/ 20.0 |
| HP-26 |
120.0
/ 454 |
75
/ 500 / 5.0 |
25.5
/ 96.5 |
24
/ 61 |
72.5
/ 184 |
2
/ 5.1 |
¼"
vent line
1¼" socket |
64
/ 29.0 |
Note: Maximum external
operating temperature 120°F (50°C). Maximum internal
operating temperature 100°F (38°C). Minimum operating
temperature 40°F (4°C).
*Diameter, height and weight may vary slightly without
notice.
** In keeping with current industry standards, drawdown
factors are based on Boyle’s law. Actual drawdowns
will vary depending upon system variables, including the
accuracy and operation of the pressure switch and gauge
and operating temperature of the system.
|
|
|
|
